Inner Ring of 5 Grade Tolerance

table6

Inner Ring of 0 Grade Tolerance
dmm		Δdmp		Vdp			Vdmp	Kia	ΔBs			VBS
				Diamter Series					ΔBs
				9	0,1	2,3,4			All	Normal	Modify
Over	Incl	High	Low	max			max	max	High	Low		max
0．6	2．5	0	-8	10	8	6	6	10	0	-40	-	12
2．5	10	0	-8	10	8	6	6	10	0	-120	-250	15
10	18	0	-8	10	8	6	6	10	0	-120	-250	20
18	30	0	-10	13	10	8	8	13	0	-120	-250	20
30	50	0	-12	15	12	9	9	15	0	-120	-250	20
50	80	0	-15	19	19	11	11	20	0	-150	-380	25

Note;

(1)Including 0.6
(2)Diameter series 7 and 8 , no regular cost
(3)Indicating the single internal ring of the bearing to be used in pair or group
during installation

table7

Inner Ring of 0 Grade Tolerance
Dmm		ΔDmp		Vdp				Vdmp	Kea	ΔCs		VCS
				Diamter Series
				9	0,1	2,3,4	2,3,4
Over	Incl	High	Low	max				max	max	High	Low	max
2．5(1)	6	0	-8	10	8	6	10	6	15	Permit Tolerance is Same ΔBs and ΔVbs to bearing bore
6	18	0	-8	10	8	6	10	6	15
18	30	0	-9	12	9	7	12	7	15
30	50	0	-11	14	11	8	16	8	20
50	80	0	-13	16	13	10	20	10	25
80	120	0	-15	19	19	11	26	11	35

Note;

(1)Including 2.5
(2)Diameter series 7 and 8 , no regular cost
(3)Diameter series 9,0 and 1 , no regular cost
(4)Suitable for inside and outside brake ring befor installation or after
discharge